|
Product Details:
|
| Product Name: | Green PVC Coated Welded Wire Mesh Rolls For Fencing | Material: | Carbon Steel Wire, Galvanized Wire, Stainless Steel 304/316 Wire |
|---|---|---|---|
| Hole Size: | 1/2''*1'', 1"X1"，and Accepted Customed | Wire: | 0.35-6.0mm |
| Width: | 1m, 1.22m, 1.5m, 2m | Length: | 10m,15m, 20m, 25m, 30m |
| Color: | Green, Black Green | Production Process: | Row Welding |
| Feature: | Easily Assembled, Anti-rust, Anti-corrosion | Usage: | Animal Fences, Protection Of Mechanical Equipment, Highway Guardrails, Fencing Of Stadiums, Road Fencing, Etc |
| Tensile Strength: | 300–450 N/mm2 | Elongation: | Min. 15% |
| High Light: | 0.35mm Welded Wire Mesh Fencing Rolls,6mm Wire Mesh Roll Anti Aging,Welded Wire Mesh Fencing Rolls Anti Aging |
||
Green PVC Coated Welded Wire Mesh Rolls for Fencing
Products description:
Welded wire mesh can be made into rolls or sheets. The surface of welded wire mesh can be dipped or sprayed with vinyl powder. A protective film can be formed on the surface of the welded wire mesh, and it can effectively isolate the metal wire from the outside water or corrosive substances, increase the service time, and there are difference of colors for you to choose, and then it makes the mesh surface show different colors, make your yard looks beautiful. The vinyl welded wire mesh is usually used outdoors for protection.
Production process:
Plastic spraying refers to a surface treatment method of spraying plastic powder on products. Plastic spraying is also known as electrostatic powder spraying. It uses a metal electrostatic trigger to make the plastic powder charged, adsorb it on the surface of the metal piece, and then through 180~220 ℃ baking, make the powder melt and adhere to the surface of the metal piece. Plastic spraying products are mostly used for indoor boxes, and the paint film has a flat or matte effect.
Dipping is to evenly spray plastic powder on the metal by heating the metal to form a layer of plastic film, or put the metal parts into the heated dipping solution, so that the plastic powder is coated on the surface of the metal parts after cooling. This process has the characteristics of no need for molds, low processing cost, simple molding, and can process various shapes. It can be divided into hot dip plastic and cold dip plastic according to whether heating is required. It can also be divided into liquid dip plastic and powder dip plastic according to the raw materials of dip plastic.
Compared with these two different processing technologies, the cost of plastic dipping is relatively low, but the quality of the sprayed product is better than that of the dipped product, and the weight is heavier, but the appearance of the product is very smooth and round.
Selling points:
It has the characteristics of anti-corrosion, rust prevention, acid and alkali resistance, moisture-proof, insulation, aging resistance, good feel, environmental protection, long service life, etc.
Specifications:
| Wire Diameter | Hole Size | ||
| before coated | after coated | inch | mm |
| 2.2mm | 2.6mm | 4" x 4" | 101.6mm x 101.6mm |
| 2.2mm | 2.6mm | 4" x 3" | 101.6mm x 76.2mm |
| 2.0mm | 2.5mm | 4" X 2" | 101.6mm x 50.8mm |
| 1.9mm | 2.4mm | 3" X 2" | 76.2mm x 50.8mm |
| 1.9mm | 2.4mm | 2" X 2" | 0.8mm x 50.8mm |
| 1.9mm | 2.4mm | 2" X 1" | 50.8mm x 25.4mm |
| 0.8mm | 1.1mm | 1/2" X 1/2" | 2.7mm x 12.7mm |
| - | - | 3/4" X 3/4" | 19mm x 19mm |
| 0.6mm | 0.9mm | 1/4" x 1/4" | 6.35mm x 6.35mm |
Contact Person: Jack Tian
Tel: +86 15831183931
Fax: 86-311-87032838
